April 16, 2026
Description
这是一款专为X2D设计的废料盒，解决了P系列X系列废料盒无法安装的问题。采用了镂空设计，打印更省料，方便观察竹屎量。分体式使用起来更方便。同时也能兼容P/X系列。This is a waste box specially designed for the X2D, solving the problem that the waste boxes of the P series and X series cannot be installed. It features a hollow-out design for more material-efficient printing and easy observation of waste residue volume. The split-type structure makes it more convenient to use.Also compatible with the P/X series。
安装需要拆废料口下面的那颗螺丝，使用铲刀螺丝（bt3-8,比原有螺丝长一点，螺纹长度8mm）穿过滑轨重新装上即可。如下图。请不要直接差评，有问题可与我沟通，修改。
To install, remove the screw under the waste outlet. Use the scraper screw (BT3-8, slightly longer than the original one, with a thread length of 8mm), pass it through the slide rail and reinstall it. Please refer to the figure below.
Please do not leave a negative rating directly. If you have any questions, feel free to contact me and I will make revisions.
还有好用不伤板的X/P/A系列铲刀We also have efficient and board-friendly scrapers for the X/P/A series.
还有一些有趣的东西可以打印。There are also some interesting things that can be printed.
测试可以打印小船或者一个立方体或者一个真的可以用的花洒。For testing, you can print a benchy boat, a cube, or a fully functional shower head.
分割线
License:
Standard Digital File License
mountainstar
