Spider Mask HueForge – 150x150mm

This striking Spider-inspired mask HueForge print brings a clean, modern take on a fan-favourite superhero design, using layered filament transitions to create depth, texture, and sharp contrast without any paint.

At 150mm x 150mm, the piece focuses on bold linework and smooth gradients, highlighting the iconic web pattern and eye shape with a high-detail finish that stands out on any display.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 1.84mm

    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #979797 PLA Elegoo Grey  Transmission Distance: 1.5
    #ffffff PLA Sunlu White 2.0  Transmission Distance: 2.7
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White 2.0 for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)