PLEASE SEE ATTACHED ASSEMBLY GUIDE PDF
1:29 Scale 58' Depressed Center Flatcar. This car uses my 6-wheel Buckeye Trucks available on my page.
Minimum Radius/Diameter: 4' / 8'
Hardware List:
- (2) ¼" Steel Rod - 245mm long
- (14) ¼" Steel Rod - 74mm long (only 4 needed. Use all 7 for adding weight to car)
- (2) ¼" Steel Rod - 24mm long
- (4) M4 Threaded nut heat-insert. 6mm OD. 8mm deep is preferred but can be 6 or 10mm deep.
- (4) M4x14mm button head screws (allen key head)
- (1) Kadee #907 coupler set
- (1) 3/64" brass rod 4-pack (K&S metals)
- Adhesive. I prefer to print with PETG and use JB Weld Plastic Bonder epoxy to join the large pieces. For small pieces I prefer super glue gel.
- Optional: If using ‘Old Style Brake Wheel’, you'll need (2) 6D 2" Finish Nails. Cut them down to 38mm long, eliminating the pointy end.
512 Designs
