Green Mage - HueForge artwork inspired in FFIV

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
    Start with Charcoal
    At layer #14 (1.2mm) swap to BambuLab Green
    At layer #20 (1.68mm) swap to Apple Green
    At layer #27 (2.24mm) swap to Ivory White for the rest.

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #c2e189 PLA BambuLab Matte Apple Green  Transmission Distance: 1.2
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
 The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.56mm