Jolteon VMax 3d Pokemon Card

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 143.8x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #080a0d PLA Basic Black  Transmission Distance: 0.3
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 1.2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Yellow
    At layer #12 (1.04mm) swap to Cobalt Blue
    At layer #18 (1.52mm) swap to Yellow
    At layer #24 (2mm) swap to Jade White 
 

AMS for the 3d Model.