Bring the magic of Pokémon to life with this Pichu kit card!
This model prints flat and transforms into a fully assembled ~60mm display figurine of Pichu that can stand on its own. Simply print, pop the pieces out, and assemble.
Features:
Compact, print-in-place style kit card
Cleanly separated parts for easy removal
Designed for FDM 3D printing
Beginner-friendly assembly
Accurate proportions inspired by the classic Pokémon design
Printing Notes:
This kit card requires an AMS.
Ensure the bed is cleaned thoroughly before printing to prevent any first layer issues.
Let the print bed cool completely before removing the print. Removing early may warp the piece.
While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk!
Assembly Notes:
There are a grand total of 9 pieces. The small connectors are all throwaways
Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife
Assembly GIF below should provide step by step instructions, but feel free to ask if something is not clear!
Kadis EDR
