September 28, 2023
Description
A moving, print-in-place version of your favourite magical McGuffin: the Timer Turner! Both a 3D version (minimal assembly required) and a 2D version (fully print-in-place) are available. Prints quick and requires minimal filament (around 12g).
Printing instructions
The model is not very hard to print, but does contain some small overhangs and needs proper part cooling. To ensure smooth movement the following settings are strongly recommended.
Two versions are provided low tolerance (0.25mm) and high tolerance (0.4mm). The former will result in a more snug fit, but movement may be too stiff, depending on your printer. The high tolerance version is a bit more lenient. Print the files as they are oriented in the .stl files. For AMS/MMU users who want to make a multi-colour print: .3mf files are included. If these are opened you will get a collision error: this can be ignored.
Assembly instruction
Can be used with both the 2D and 3D version, to cover the rotating knob of the model. Designed to be a snap fit, however this will depend on your printer. You can play around with hole XY compensation, or be lazy and use some super glue.
Only for the 3D version. Can be pushed into place, which is easiest to do from the side of the model that faced the print bed.
Happy printing!
Boost MeI spend a lot of time making these models. Do you like them? Please consider boosting me (it's free)!
License:
Standard Digital File License
InaniaEtVana
