Emotional Support CoWorker Name Badge (HueForge)

I made this for my daughter as a request. You know who those Co-Workers are.

 

I had added a negative part to fit the following magnetic pins. You may remove it or adjust the size as needed.

 

Was designed with these in mind, but anything similar should work and the size is adjustable.

 

https://www.amazon.com/dp/B0BX6Z4TCR

 

 

Boost MeMy daughter needs stuff. Help a dad out!

===

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

    Polymaker Panchroma PLA Matte Charcoal Black  Transmission Distance: 0.3
    Polymaker Panchroma PLA Matte Army Red  Transmission Distance: 0.3
    Polymaker Panchroma PLA Matte Cotton White  Transmission Distance: 2.5
This print uses 3 unique filaments

Swap Instructions:
    Start with Charcoal Black
    At layer (2.4mm) swap to Army Red
    At layer (2.56mm) swap to Cotton White for the rest.