Cupholder Fiat Ducato Boxer Jumper 3D Printer File Image 1

Cupholder Fiat Ducato Boxer Jumper 3D Printer File Image 2

Cupholder Fiat Ducato Boxer Jumper 3D Printer File Image 3

Cupholder Fiat Ducato Boxer Jumper 3D Printer File Thumbnail 1

Cupholder Fiat Ducato Boxer Jumper

Teseo

Description Comments Tags

Description

🚐 Fiat Ducato Cup Holder | Driver Side (Bottle/Can Holder)

Have you ever driven a Fiat Ducato (or Peugeot Boxer / Citroën Jumper) and struggled to find a place for your drink that wouldn't fly away at the first roundabout? We all know the original storage is... less than ideal.

I designed this specific holder for the driver's side, optimized for absolute stability through precise mechanical fastening. It’s the perfect travel companion for long hauls or van life!

We also have three versions for the passenger.

🛠 Project Features

Perfect Fit: Tested on X250 and X290 models (2006-present).
Versatility: Designed to hold standard 33cl cans, "slim" cans, and 50cl water bottles.
Ultra-Solid Mounting: Unlike snap-fit models, this design uses screws for a permanent hold. The addition of a third small screw is crucial to prevent the part from flexing, ensuring total stability and zero vibrations.
Ergonomic Design: Does not interfere with leg movement or access to door controls.

🔩 Required Hardware

To correctly mount this holder, you will need:

2x 3.5 mm Screws: maximum length 15 mm, countersunk head.
1x 2.5 mm Screw: length 20 mm, countersunk head.

💡 Printing Tips

To ensure the part withstands summer heat inside the cabin, I strongly recommend using the following materials:

Setting	Suggested Value
Material	PETG, ASA, or ABS (Avoid PLA, it will melt!)
Layer Height	0.20mm or 0.24mm
Infill	20% (Gyroid or Cubic)
Walls	At least 3 or 4 (to provide grip for the screws)

🔧 Mounting Instructions

Position the holder in the dedicated area of the dashboard/door on the driver's side.
Mark the drilling points and proceed with a small 1.5/2mm pilot hole.
Insert the two 3.5x15mm screws into the main holes.
Use the 2.5x20mm screw for the additional anchor point, making sure to fill any gap between the dashboard and the part with a bit of rubber or some washers for perfect stability.
Tighten by hand to avoid stripping the vehicle's plastic.
Finishing: Apply the three included screw caps using a drop of glue to fix them securely in place.

🙌 Support my work

If you print this model, please upload a photo (Make)! It helps me immensely to understand how to improve my designs. If you have suggestions for variants, let me know in the comments!

🚐 Do you love Van Life? Check out my profile to discover my other camper-dedicated projects and improve your van's organization!

Happy travels and happy printing! 🚀