Launchable ESSM Model Rocket, 18mm A,B,C motors

Disclaimer

This project, including all 3D models, documentation, and associated information, is provided for informational and educational purposes only. It represents an experimental design and has not been certified, tested, or verified for safety, reliability, or compliance with any standards.

Building, modifying, or operating model rockets involves significant risks, including but not limited to property damage, personal injury, or death. This project is intended for experienced users only.

By using these files or any related information, you acknowledge and agree that you do so entirely at your own risk. The author makes no warranties, express or implied, and assumes no responsibility or liability for any damage, injury, loss, legal consequences, or other issues arising from the use, misuse, construction, modification, or operation of this design.

Users are solely responsible for ensuring that any use of this project complies with all applicable laws, regulations, and safety guidelines in their jurisdiction.

UPDATE: Ran a more accurate simulation, OG model was over-stable due to larger diamater midsection (updated RockSim screenshot). May result in weathercocking. Updated fill in nosecone should alleviate issue (18MAY26). Please re-print and replace nosecone if planning on launching. Optimized for B6-x

Launchable model rocket, based on the RIM-162 Evolved SeaSparrow Missile (ESSM). 
Fits Estes 18mm rocket motors (A,B,C).

Approx. 489ft on a B6 motor, 1115ft on a C6

DO NOT CHANGE INFILL. 100% INFILL REQUIRED TO MAINTAIN CP/CG AND FLIGHT STABILITY

See assembly guide below