Wet Cat Food Can Holder Lazy Susan 3oz, 5oz, Gems

V8 is a complete redesign of my previous version listed below.  I recommended you use my 3mf files to get the best quality per performance prints.

https://makerworld.com/en/models/698986

Key Changes:

Sturdier Design that prints at a higher quality at height.

The base attaches and will not come off if you pick it up.

Added BB's for smoother rolling under weight.

Notes:

Uses a 608 bearing.  You can 3d print one but due to the weight when fully stacked, I would recommend using a metal one.

Please consider Boosting if you like it!  It means a lot!

Purchased Parts:

1 - 608 Bearing: https://a.co/d/0gtwB8pN or Printed: https://makerworld.com/en/models/473167-608z-6000z-6001z-roller-bearing-v2#profileId-383170

10 - 4.5mm BB's: https://a.co/d/0488Gm5O (Costs about $1.50 at Walmart)

Assembly Instructions:

Place BB's on top of the holes on the base.  Press in firmly using a screwdriver handle or something similar.

Add 608 Bearing to the top.  This will be a tight fit.

Align the base tabs with the top hole and pinch in 2 of the tabs slightly to allow it to slide into the hole.  

Buy Me a Coffee…

buymeacoffee.com/3dartbydesign