HAM Tarot POTA (Hueforge)

HAM Tarot Card, POTA Edition.

 

Boost Me

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.16mm

    Polymaker Panchroma PLA Matte Charcoal Black  Transmission Distance: 0.3
    Polymaker Panchroma PLA Matte Army Dark Green  Transmission Distance: 1.8
    Polymaker Panchroma PLA Matte Cotton White  Transmission Distance: 2.5
This print uses 3 unique filaments

Swap Instructions:
    Start with Charcoal Black
    At layer #13 (1.12mm) swap to Army Dark Green
    At layer #17 (1.44mm) swap to Cotton White for the rest.