P2S / X2D TPU Holder, lightweight & simple design

Stop! A new and improved Version 2 is available.

For better stability and print reliability, I recommend using the V2 model:

https://makerworld.com/de/models/3033855-p2s-x2d-tpu-holder-v2-reinforced-screw-mount#profileId-3410344

This is a modified version of Antolka’s TPU spool holder for the P2S and X2D printer.

It works just fine without ball bearings.

The design has been adjusted with a focus on reducing print time and material usage while maintaining structural stability.

It features an ergonomic shape with chamfers and rounded edges for comfortable handling and a clean appearance.

All parts are arranged on a single build plate and make use of different layer heights to balance print speed and surface quality.

• 50% time and 40% material saving
• Everything on one plate with diffrent layer heigts

Note: The holder is not suitable for cardboard spools because they cause too much friction.

For large projects such as bags or shoes, the TPU should be printed from a dry box.

If you experience issues with the filament unwinding or tangling, you may want to print this accessory:

https://makerworld.com/de/models/2973154-hanging-pendulum-filament-guide#profileId-3334636