Garden Watering Pipe Irrigator Set for 15mm Hose

A simple and effective watering pipe for your garden beds. This pipe is 180mm long and designed to fit standard 15mm garden hoses. It features precision 1mm spray holes that create a consistent water curtain, perfect for raised beds or vegetable rows.

The set includes specially designed ground stakes that use a snap-fit system. You can easily click them onto the pipe at any point to lock it securely in the soil.

This kit includes two versions of the pipe:

1. Flow-through: With connectors on both sides to extend your line.
2. Dead-end: With one side closed to finish the watering line.

Technical Details

• Pipe Length: 180mm
• Hose Diameter: 15mm
• Spray Holes: 1mm diameter
• Material: PETG (Highly recommended for UV resistance and to ensure the stakes remain flexible enough to "snap" without breaking).

Print Settings

• Walls/Perimeters: 5 
• Infill: 20% (For the stakes).
• Supports: on bed only

Assembly Tip: If the hose is difficult to slide on, dip the end of your garden hose in hot water for a few seconds to soften it, this will create an airtight seal on the 15mm connector.

If you need a custom length or different hole spacing, you can easily design a similar pipe yourself! I’ve made a step-by-step tutorial on how to create this project. Check it out on my YouTube 

 

Boost Me