THE ULTIMATE PHONE STAND

THE ULTIMATE PHONE STAND

This is a compact but stable phone holder that can hold your phone vertically and horizontally. The angle is adjustable and when not in use you can fold it up which makes it extremely easy to take with you. It also has a clicking mechanism that can be a little stiff at first but should ease after a short period of use. You can also print out TPU pads that can be glued to the stand. NOTE: The optional TPU plates require glue. I also recommend using glue on your buildplate when printing TPU.

 

Features

• Compact design
• Adjustable angle
• Clicking mechanism
• Optional TPU pads
• Hinges

 

Assembly

First remove the small supports for the pins, then insert one pin into the hole on the base plate and carefully bend the other pin into the other hole. Repeat the process with the other part and make sure it is in the right way. 

If you printed the TPU pads you will need to glue each one to the stand. 

 

Thank you

To make this model it took a lot of time and energy and several prototypes. And after several late nights and prototypes I have made this stand. A boost and like are greatly appreciated :)

 

Check out my account for more great models:

https://makerworld.com/sv/@swedish3D 

 

Boost MeCan't find the boost button? It's right here :)