MagClick - The Magnet Powered Clicker

MagClick - The Magnet Powered Fidget Clicker

Sharp, Satisfying, Magnetic – A next-level clicker

Magnets:

You will need 20 round 4×2 mm magnets, or 6×3 mm magnets for the XL size. I recommend using magnets from the Bambu Lab store because they are really high quality and work very well for this. If you purchase them through the Bill of Materials, the cost is the same, and you support me in the process.

Make sure to use strong neodymium magnets!

 

Assembly:

Magnet order:

I recommend using a small amount of superglue when attaching the magnets.

Use the picture below to arrange the magnets correctly. The north and south sides don’t matter, only their orientation relative to each other.

 

To make assembling easier, press and twist the pins in place at a slight angle like you see in the video!

 

Boost MeConsider leaving a boost to support my hobby :)

Check out my other Fidget Clickers!
PentaClick - The Ultimate Rubber Band Clicker                          PentaSpin - The Spinning Fidget Clicker

If you want to sell my designs, I offer commercial licenses in https://www.patreon.com/YosaNatural