Push-fit Plant Marker and Label Set

Push-fit Plant Marker and Label Set

A versatile set of push-fit and fixed plant markers designed for garden and greenhouse use. The system includes both modular components (separate markers and labels) and solid, pre-assembled versions with integrated labels.

The set includes vegetable and plant labels with space for notes, available in both English and Norwegian.

If you like this model, feel free to give it a boost 👍

Included plant labels:

• Tomat / Tomato
• Gulrot / Carrot
• Paprika / Bell Pepper
• Agurk / Cucumber
• Løk / Onion
• Vannmelon / Watermelon
• Potet / Potato
• Sukkererter / Snap Peas
• Mais / Corn

This collection consists of 7 plates:

• Plate 1: Norwegian Plant Markers
• Plate 2: Norwegian Plant Labels
• Plate 3: Norwegian Plant Markers with Labels (Solid)
• Plate 4: English Plant Markers
• Plate 5: English Plant Labels
• Plate 6: English Plant Markers with Labels (Solid)
• Plate 7: Customizable Blank Set (Marker + Label + Combined Solid Option)

Plate 7 contains blank versions of all components, allowing you to customize your own text or plant names.

Print Settings (PLA Profile)

• Nozzle: 0.6 mm
• Layer height: 0.18 mm
• First layer height: 0.24 mm
• Material: PLA
• Brim: 3 mm
• Supports:
  • Markers: No supports required
  • Labels: Minimal support required for the slot

Material Recommendation

PLA can be used outdoors but is not recommended for greenhouse use, as it may deform under higher temperatures.

For best results, use:
PETG – good heat resistance and easy to print
ASA – excellent heat and UV resistance, ideal for long-term outdoor use

ASA Print Settings:

• Markers: Outer brim = 13 mm
• Labels: Outer brim = 13 mm, brim-object gap = 0 mm

If warping becomes an issue, consider printing fewer labels at a time (4–5 per print).

Printing Notes (Manual Filament Change)

The included print profile is configured with pause commands for manual filament changes to achieve dual-color text.

• Markers: Pause at layer 7
• Labels: Pause at layer 16

This allows for clean and readable text using a simple filament swap.

The model is compatible with both manual filament changes and multi-material systems. The included profile uses pause commands for easy color changes without AMS.

⚠️ Important

The specified pause layers are based on the following layer settings:

• First layer height: 0.24 mm
• Other layers: 0.18 mm

If you change layer heights, the pause may no longer align correctly with the text layers.
Make sure to adjust the pause height in your slicer if you modify these settings.

All parts in this profile are scaled to 90%.
Scaling below 80% is not tested and may affect fit and tolerances.

Notes

Designed with practical tolerances for a reliable push-fit connection. Parts fit securely while still allowing easy assembly and removal. Slight material flexibility ensures a strong grip without damaging the model.

Feel free to modify and customize for personal use.
I use a POSCA pen to write on the labels for clean and durable markings.

Happy printing and planting 😊