September 28, 2023
Description
! Please note that this is an electrical device. Wiring and use is entirely at your own risk.
Use only led bulbs that do not heat very much. !
To be added
- Drawing of model dimensions
- Models for led strip lights (for better light distribution)
- Source step files
You need 1x power cord (I used with a switch) 7x M4x10 screw 1x Bulb socket 1x RGB led bulb | |
The model is now ready for two bulb sockets. For another one, send me a message
| |
| Push the cable through the prepared hole. Prepare to secure it. | |
| Connect the cable to the bulb socket. Attach the socket to the bottom of the pencil and secure the cable by tightening the screws. | |
| Screw in the bulb | |
| Place the cover on the bottom part, turn it over and screw it on with the three M4 screws. | |
| You can also screw on the legs of the lamp. (they are mainly there to lift the bottom part for heat dissipation) | |
And it's already lit. |
License:
BY-NC
rostap
