Modular Honeycomb Wall Organizer

Description

A clean, expandable hex wall system for organizing everyday items.
Keehive uses a clip-together design with magnetic inserts, so you can build your layout, change it anytime, and keep everything looking sharp.

Start with one tile or build out a full wall. It grows with you.

Why People Download This

• Modular honeycomb design
• Snaps together with a clip system (no glue)
• Magnetic inserts for quick swaps
• Fully customizable layout
• Clean, modern look on the wall
• Designed for easy Bambu printing

How It Works

Each hex tile connects on the flat sides only using small clips.
Inserts attach using hidden 10mm magnets that are embedded during printing.

You can:

• Expand in any direction
• Swap inserts anytime
• Reconfigure your layout in minutes

Assembly (Simple Workflow)

1. Customize Your Print

Open the file and adjust as needed:

• Duplicate tiles
• Change letters
• Choose inserts

Send to your Bambu printer.

2. Insert Magnets (Pause Step)

The print will pause mid-print.

• Drop in 10mm magnets
• Keep polarity consistent
• Resume print

Magnets will be sealed inside the part.

3. Build Your Layout

Lay out your tiles before mounting.

• Only connect on flat edges
• Keep alignment tight for a clean honeycomb

4. Snap Tiles Together

Insert clips between tiles.

• Press until fully seated
• Locks tiles into one solid structure

5. Add Inserts

Drop in your inserts.

• Magnetic connection
• Easy to swap or reposition

6. Mount to Wall

• Hold layout in place
• Mark holes
• Add anchors if needed
• Screw into wall

7. Done

Start using it.
Add more tiles anytime.

Included Parts

• Hex tiles (base units)
• Clip connectors
• Inserts (bar, hook, letter, blank, etc.)
• 10mm magnet slots (pause-to-insert)

Use Cases

• Key holder
• Entryway organizer
• Desk wall setup
• Cable management
• Mail + notes
• Minimal decor
• Custom name displays

Important Notes

• Designed for light items only
• Not for heavy loads (bags, large gear, etc.)
• Best results with proper wall anchors

Print Tips (Bambu Optimized)

• No supports needed
• Print face-down for best surface
• Use pause at magnet layer (already set if included)
• PLA or PETG both work well
• Use a brim if needed for adhesion