Into the Jaws of Death

My tribute to those brave souls who lost their lives at Omaha Beach on June 6th 1944. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 1.76mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #8f949b PLA ELEGOO Basic Gray  Transmission Distance: 3.4
    #ffffff PLA #BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Gray
    At layer #17 (1.44mm) swap to Jade White for the rest.