Panda Branch with Cable Management

My version of the Panda Branch mounting system with Cable Management.  I was tired of the rat's nest of wires behind my P1S and wanted a way to manage it.  The biggest contributor was all of the USB power cables due to the Panda Branch.  (Powering 2 LED strips in the riser, a Panda Status, and Wyze v4 camera) So, I came up with this layout.  The mounting screws to support it are concealed inside of the Panda Branch bracket at the top and won't be seen once you secure the lid for even better aesthetics. To install, pull the original back plate screws out of the back plate at the top edge and use two of the screws provided in the bill of materials below when installing.  Honestly, I already had the needed screws from all of the various other items purchased through Bambu Lab.  If you horde screws like me, you probably already have them, they just need to be 2mm longer.  If I remember right, the Panda Branch comes with the necessary screws to put the lid on.  Also, for mounting, I put 7 recesses in the back of the mount for 6x2mm magnets.  I don't really think they are necessary, but they can only help.  

Aside from this design, you will also see the Customizable AMS HUB cables manager with magnets by Christian Cristofori.  Although I didn't offset it vertically like his model intended and instead mounted it exactly where the hub was originally.  The trade-off there is that the lower left cable holder is over the exhaust fan.  I don't feel that that is going to affect it too much, so I went with it.  You may also notice that i added one extra cable holder near the poop chute.  I won't be sharing my model, as that design is his, but i still recommend using his model as a companion to this one.  Customizable AMS HUB cables manager with magnets - Free 3D Print Model - MakerWorld