Pumpjack

Project: PumpJack.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.50842mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ff7238 PLA Prusament Prusa Orange  Transmission Distance: 6.6
    #fce300 Overture Yellow Transmission Distance: 6
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Prusa Orange
    At layer #17 (1.44mm) swap to Yellow
    At layer #24 (2mm) swap to White for the rest.
 

Boost MePlease give it a like or boost really helps out getting me work out there!!! If you want me hueforges check out my page and give me a follow thanks