Crime Scene, Mystery Bookmark

Case closed. 🕵️♂️Elevate your reading experience with this uniquely textured "Crime Scene" bookmark, designed for mystery lovers and true crime enthusiasts.

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1 (White, Beige, or Light Gray for the ground/pavement)

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 4 unique filaments

Swap Instructions:

Start with Desert Tan (White, Beige, or Light Gray for the ground/pavement)

At layer (0.88mm) swap to Black

At layer (1.04mm) swap to Red

At layer (1.36mm) swap to Yellow for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print.

Stringing may occur with Hueforge, just use a lighter to whisk them away.