This is the frame for the S England Creative HueForge Lithophanes and meant to hold and display HueForge Lithophanes!
For instructions on the LED Light Strip profile, download the attached assembly guide.
For the USB-C LED Light Panel profile, see instructions below.
Require Materials:
Printed USB-C LED Light Panel profile
LED Light Panel (from amazon or bambu)
Some type of adhesive (i used double sided tap)
Add you adhesive to the LED panel back
Placed LED Light Panel into back of the Light Box and make sure to insert the USB-C port into the hole and then press the light panel firmly to bond the adhesive.
Once the LED Light Panel is secured into the back back of the light box, get your printed lithophane.
Place your printed lithophane into the front panel.
It should fit into a recess built into the front piece of the light box.
Slide the back piece into the front piece. It will be a snug fit so you will have to make sure it slids in evenly and not on corner at a time.
Once the two pieces fit together, flip over and make sure the lithophane is sitting properly into the recess of the front plate and nothing moved.
The plug in the lithophane into the USB-C power source and turn on the light and enjoy!
S England Creative
