Far Side of the Moon

Boost MeThis took me hundreds of hours please leave a make and a comment, Id love to see this in your "space"!

click the dropdown and select "download stl" it'll show a list of tiles for you to download!

 

**With the frames linked below you can mount this in either portrait or landscape depending on your space**

~~LINK TO FRAMES HERE!!~~

 

-Print all tiles at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

-You may print at higher layer heights below the Base Thickness of 0.48mm
-The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

-This print uses 4 unique filaments

-Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Space Grey ( ;] ) or Dark Grey
    At layer #13 (1.12mm) swap to Light Grey
    At layer #20 (1.68mm) swap to White for the rest.

 

-Each Tile is it's own 3mf file with the correct Row and Column in the name.
-The GridLayout.png below shows each section and it's size in mm to help visualize.
 

 

  *It is important to note that some tiles will not have white and will not have a layers above #19/20, this is normal.

  *Tiles with pure black will be a little thin so take care when removing from your build plate.