Bambu Lab Handle Cover

Here's another accessory in my collection. This is a Bambu Lab handle cover that works on the P2S, AMS HT, and AMS 2 Pro. However, it most likely works on all other similar-shaped handles. I just can't confirm or deny that because I can't test this on anything besides the ones listed. There are 2 options you can choose from: just a cosmetic version that adds a little pop of color to your setup, or one with an added lip for more convenience. They are both on the same print profile. Just make sure to double-check which plate you choose. This print is under 10 minutes and takes less than 1 gram of filament, which is perfect for that little bit of filament you have at the end of the roll. The tolerances are pretty tight, and you will have to shove it on there a little bit. But once it's on, you’re set. Simple as that. As always, let me know if you have any questions, concerns, comments, etc.

 

Enjoy,

LeopardGeckoGuy

 

Boost MeIf you liked this model and found use out of it a boost always helps a lot. Thanks for your continued support. YOU are what makes these models possible!