Cherry Blossom Lake Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.63858mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #ff5869 PLA BambuLab Basic Pink  Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Jade White
    At layer #24 (2mm) swap to Pink
    At layer #30 (2.48mm) swap to Jade White for the rest.
 

Boost MeLike this cherry blossom Hueforge? A Boost helps support more prints like this — thank you!