Mitsubishi Lancer Evolution Hueforce

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 144x180mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm

    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA Sunlu White  Transmission Distance: 7.5
    #c901c4 PLA+ Sunlu fuchsia  Transmission Distance: 8.8
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to White
    At layer #18 (1.52mm) swap to fuchsia for the rest.