Flat to 30° Banked Track - 1:64 Diecast compatible

This straight track is an alternative to using a flexible factory track to guide the car into banked corners. The track starts flat, gradually slopes to a 30-degree incline, and connects to the 30° banked corner in my 30° banked Pack.  https://makerworld.com/en/models/2747178-30deg-banked-curve-pack-1-64-diecast-compatible

If you connect the slopes on the left and right sides, these can also be used as a slalom of sorts.

The 3mf file contains left and right tracks for entering and exiting inclined curves, because the ramps are directional, so you need both.

Print -

• I have tested the print configuration on the CoreXY and my bed printer to ensure it prints correctly using the included settings.
• These designs are for vertical printing to make the track surface as smooth as possible.
• The bottom of the track is designed with a support area. This provides a larger, flat area for placement during printing and use. It also provides a support area to prevent printing failure due to its height.

As always, please let me know if you encounter any problems, and I'd be happy to help.