Mother’s Day Lithophane – Series 2 (Set of 2)

Mother’s Day Lithophane – Series 2 (Set of 2)

Version 1: Heart Frame – 5 hr 15 min   Version 2: Circular Frame – 5 hr 8 min

Series 2 introduces two new Mother’s Day lithophanes featuring the same emotional mother‑and‑child relief, each presented in a different decorative frame. Version 1 uses a soft heart‑shaped border, while Version 2 features a clean circular frame for a classic look.

Both lithophanes are 125 mm tall with a curved profile for strong backlighting performance. The frame shape is the only difference — depth mapping, curvature, and image quality remain consistent across both versions.

 

Image Quality Features

• Smooth tonal transitions
• Clean, well‑defined silhouettes
• Strong backlighting performance
• No merged or missing figures

These lithophanes produce crisp, high‑contrast illumination when placed in front of an LED panel, window, or display stand.

 

Included in the 3MF File

• Both versions are fully sliced and ready to print:
• Version 1 (Heart Frame): ~5 hr 15 min
• Version 2 (Circular Frame): ~5 hr 8 min
• All plates use identical curvature and depth mapping for consistent results.

 

Creator Notes

This second series expands the Mother’s Day collection with two elegant frame styles. The heart frame offers a warm, sentimental presentation, while the circular frame provides a clean, timeless look.

Created by N.M.P Designs.

Boost MeIf you enjoy the models or plan to print them, a free boost on the project page would mean a lot. Thank you so much.

 

Print Notes

All slicer settings are default, with only a few small adjustments for lithophane printing:

• Layer Height: 0.12 mm
• Top Layers: 0
• Bottom Layers: 0
• Infill Density: 100%
• Infill Pattern: Rectilinear
• Seam Position: Rear
• Supports: None
• Material: PLA

White or natural PLA gives the best backlit clarity.
Curved lithophanes naturally sharpen when illuminated from behind.

 

Adhesion Note

For best results, print on a clean plate. 

PLA Basic White adheres very well, but if your plate is worn or has fingerprints, apply a light glue‑stick layer for extra grip.