Keep your desk, bag, and drawers organized with the Anti-slip Cable Manager. This minimalist and functional 3D-printed accessory is designed to keep your cables perfectly coiled while ensuring they remain in peak condition.
Key Design Features:
- Anti-Slip Security: The specifically engineered hooks at both ends ensure that once your cable is wrapped, it stays put. No more loose loops or cables sliding out of the holder when you throw them in your backpack.
- Prevent Over-Tightening: Traditional cable ties often lead to "cable fatigue" by bending wires too sharply. This manager features a central core designed to maintain a safe bending radius, preventing you from winding the cable too tightly and protecting the internal wiring from damage.
Sizing & Customization:
- Standard Size: The default model is optimized for cables up to 1 meter (3.3 ft) in length.
- Fully Scalable: If you need to organize longer or thicker cables (like laptop power bricks or heavy-duty extension cords), you can easily scale the model up in your slicer. For example, scaling to 150% or 200% will comfortably accommodate cables much longer than 1 meter (3.3 ft).
Print Settings:
- Supports: No supports required. Print it flat for the best results.
- Material: Works great with PLA, PETG, or Tough PLA.
- Layer Height: 0.2mm is recommended for a smooth finish.
Valca3D
