IKEA Kallax conversion pin - center plate removal

IKEA Kallax conversion pin - easy way to remove the centre plate and replace the original wooden pins so there is nice flush space.

Printing:

Print from PETG, make sure the PETG is dry, you should not be able to snap this pin in your hand.

Uses only 2.5g.

Assembly: 

Remove the plate and push the pins in the holes to secure the lower plate.

Removal:

The pins have a groove so ones you would want to remove them, just slide a screw driver under them and pull them out.

Also I will really appreciate your feedback in the comments🙂