Beadlock 1.3 inch - military style

Boost MeBoost me baby, need them $$$ for a new printer! xoxoxo ;)

*** I like to keep my models free, so if you'd like to help me out even further, you can Buy Me A Coffee too! ***

 

The 1.3 inch variant of my popular military style beadlock rims, now utilising M2 bolts. I've added two options, one that uses ten M2 bolts on the outside (for aesthetic purposes only) and another with printed dimples (for a different look or to avoid RSI trying to screw in a million screws)

 

1.0 inch version: https://makerworld.com/en/models/1294020-beadlock-1-0-inch-military-style#profileId-1324775

 

These will suit most 3rd party tires, like those from INJORA, DJ CRAWLER, etc. They have a large offset, so the wheels will protrude wider than standard and should easily bolt on to a standard 7mm hex without any problems.

 

Each wheel requires six M2 x 8mm, plus ten M2x4mm (or up to 6mm long) if using the version with external bolts. Aligning the first bolt to tighten the parts together can be a bit of a pain, but just carefully line the front and back up and once the first bolt grabs it's pretty simple from there.

 

The opening to put the wheel nut on is slightly wider than the 1.0 inch version, you'll need a hex driver <9mm in diameter.