Parametric Multiboard Bottle or Cylinder Holder

Just enter the diameter of the object you want to store, the thickness of the walls, and the height of the holder and you're ready to print. 

The design is light on filament and print time with most sizes coming in well under an hour in PLA and using less than 30g of filament. The customisation is relatively foolproof (to be determined based on foolishness) as I've set minimum and maximum parameters on things such as wall thickness to prevent it inadvertently turning into abstract corporate art. But there's always an edge case that one can't predict so if you have any issues, congratulate yourself for being an edge case and then please message me so that I can fix it. The community grows with feedback.

These slide onto the Multiboard wall using any of the small thread fix point, the mid thread fix point, or the large thread fix point (flush fit is best), giving you loads of flexibility in your layout.

The diameter is limited to a range from 44mm to 80mm. It could go bigger but I feel that it would then need the point slots to be placed further apart for better stability. If you need something larger than that, let me know and I'll create a second parametric model for larger sizes.

Current size limits:

Diameter: 44mm - 80mm

Height: 24mm - 72mm

Wall thickness: 3mm - 5.4mm