Nezuko/Demon Slayer/Nezuko HueForge

Nezuko/Demon Slayer HueForge print. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3.  (i actually used Bambu Black)
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #d1d3d5 PLA BambuLab Basic Light Gray  Transmission Distance: 1.7
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Hot Pink
    At layer #15 (1.28mm) swap to Light Gray
    At layer #18 (1.52mm) swap to Ivory White for the rest.