Triangle Fidget - Small 10 Rings - Print-in-Place

Triangle Fidget – Print-in-Place

A compact triangular fidget toy that transforms into a satisfying stepped pyramid when you pull the centre handle.

All parts print in place and move freely once the print is finished. No supports or assembly required.

The layered triangular rings telescope upward into a geometric pyramid shape, then collapse smoothly back down when released.

Designed to be:

• Fast to print
• Lightweight
• Pocket friendly
• Satisfying to fidget with

Perfect for desks, pockets, gifts, and quick print sessions.

Boost MeA Boost is always appreciated and helps support future fidget designs ⚡

Features

• Print-in-place
• No supports required
• Expanding pyramid motion
• Compact triangular design
• Smooth collapsing action
• Lightweight print
 

My Other Fidgets

Click Image Below

 

Print Time & Filament

• Under 20 minutes
• Under 16g filament

(Varies slightly depending on printer and settings)

Print Settings

Layer Height: 0.28 mm
Supports: No
Brim: No
Infill: 10%
Wall Loops: 1
Initial Layer Speed 30 mm/s

Notes

The rings may feel slightly stiff immediately after printing. Gently move the mechanism a few times to fully loosen the action.

For best results:

• Ensure good first layer adhesion
• Use a clean build plate
• Outer Rings may separate a some angles. Easily fixed by pushing back at the same angle.