Waveshare ESP32S3 Touch 2" case for BambuHelper

Vertical and Horizontal cases for my BambuHelper project.
Waveshare 2" Touch display based on ESP32-S3: https://www.waveshare.com/esp32-s3-touch-lcd-2.htm

More information on my github: https://github.com/Keralots/BambuHelper

 

To assemble this case, you will need:
- 4x M2x4 screws.

- USB Connector: https://aliexpress.com/item/1005007148475800.html

 

Optional (if you want LED bar):
- 3V filament LED 54mm: https://aliexpress.com/item/1005007883702652.html

- LED Driver LDO6AJSA: https://aliexpress.com/item/1005005344841325.html

 

Screen Fit: The case is designed for a snug, snap-fit.

Handle with care: DO NOT FORCE the screen into the housing. If it feels too tight, check for any printing artifacts (blobs/strings) or lightly sand the edges. Be very careful not to crack the display.

Check out other cases and versions available on my profile!

 

Boost Me If you like this project, please consider leaving a like and a boost!