Parametric dog tag - rounded edges

New v3 collar with QR code: https://makerworld.com/en/models/2870012-dog-tag-custom-qr-pet-tag-lost-pet-recovery#profileId-3207500

https://qr.mypettag.net/register

Customizations available in the Customizer (MW groups):

Lines

• Line_Count: 2 or 3 text lines

Tag parameters

• Tag_Length: plate length (mm)
• Wall_Thickness: plate thickness (mm)
• Top_Edge_Radius: top edge rounding (mm)

Collar dimension (strap + mount)

• Collar_Thickness: collar/strap thickness (mm)
• Collar_Width: collar width (mm) → sets the tag height
• Slot_Width: slot opening width (0 = closed tunnel)
• Slot_Position: side or bottom (chamfered V-funnel)
• Leg_Length: leg length (mm)

Name (line 1)

• Name_Text, Name_Size, Name_Font_Family (0/1), Name_Font_Bold

Phone number (bottom line)

• Phone_Text, Phone_Size, Phone_Font_Family, Phone_Font_Bold

Middle line (only if 3 lines)

• Middle_Text, Middle_Size, Middle_Font_Family, Middle_Font_Bold

Engraving

• Text_Depth: engrave depth (mm)

Spacing

• Vertical_Spacing, Text_Spacing

Colors / Export

• Plate_Color: 21 Bambu PLA colors
• Text_Color: 21 colors (2-color swap)
• Show: all / plate / accent (export per color)

Note: Text_Depth=0.1 right now is a very shallow engrave (text barely recessed). Raise it (0.4 to 0.6) for a proper engrave or a clean 2-color fill.

Supports are required

Tree supports are recommended and set on build plate only for easier removal.

For multi-color prints, change the filament 3 layers before the top surfaces,

or paint directly the text.

Disable the prime tower.

A 3MF print profile is provided as a settings example.