Umbrella Corporation Badge Reel from Resident Evil

Badge reel to show your love of Resident Evil and the Umbrella Corporation. Not sure if it reads in the picture, but the white and red areas are raised a little less than a mm from the black base. Looks super clean in person. It fits neatly with a readily available and inexpensive badge reel available on amazon or elsewhere (very inexpensive). Generic badge reel pictured is just over 32mm wide. I have found that a few 25mm circles cut out of paper towel or toilet paper help for strong adhesion to the reel. To assemble the reel cover, put a few drops of glue into the cavity where the reel will go. place a few layers of paper towel down and press them so the glue soaks through. Place a few more drops of glue in the center of the paper towel and press down the badge reel. I use more glue on this than I normally do on such a small model, but the paper helps to overcome the difference in the shape of the cavity and the reel itself creating a really solid finished product. It can be printed without supports, but gets a little stringy underneath. This tends to not be an issue if you use paper towel to fill the gaps.