Summary
The ultimate clutter-busting solution for your media center! Hide that bulky Amazon Fire TV Stick and its rats-nest of cables cleanly behind your television or monitor with this custom-designed, 3D-printable mount. Secure, robust, and versatile, it's designed to mount exactly where it's needed using standard VESA mounting points, keeping your entertainment setup sleek and professional.
Features & Benefits
- Custom-Fit Sleeve: Specifically engineered with tight tolerances to hold current-generation Amazon Fire TV Sticks with a secure, no-wobble press-fit.
- Integrated Power Access: Features a precision-cut side hole designed to allow the power cable to plug in easily while the stick is fully seated. You won't need to remove the stick from the mount just to connect or reset the power.
- Zero-Adhesive Required: Designed for screw mounting, meaning no messy residues or peeling tape on your expensive TV back panel.
- Dual-Screw Compatibility: The integrated mounting holes are engineered to accept both 4mm (M4) and 5mm (M5) standard screws. Whichever your monitor accepts.
- Stealthy Low-Profile Design: Hides completely behind the screen, preserving the sleek look of your ultra-thin TV.
Versatile Mounting Options
- VESA Screw Mount (Preferred): Use the integrated screw hole with either an M4 or M5 screw to affix the mount securely to any standard VESA hole pattern on the back of your TV.
- Adhesive Mount: If your VESA holes are already in use, the large flat surface on the back of the mount is perfectly sized for heavy-duty double-sided mounting tape.
⚠️ CRUCIAL: Required Additional Hardware
To maintain the ultra-flush design of this mount, the Fire TV Stick cannot be plugged directly into the TV's HDMI port.
You MUST use an HDMI extension cable or an HDMI coupler plugged into the Fire TV Stick before inserting it into the mount.
The mount is designed to hold the stick securely with its cable attached, but the stick itself cannot be the connector. Please plan your cable routing accordingly.
Printing Recommendations
- Filament: PETG or ABS is highly recommended. The heat from the back of a TV can soften PLA over time.
- Infill: 25-35% (Grid or Gyroid) for structural integrity around the screw hole.
- Supports: None needed! The design is optimized to print flat-back down.
Installation Instructions
- Print the mount.
- Slide the Amazon Fire TV Stick into the mount sleeve. 3. Attach an HDMI extension/coupler to the HDMI output.
- Plug the power cable through the side access hole into the Fire TV Stick.
- Align with a VESA hole and secure with an M4 or M5 screw (or use adhesive tape).
- Tidy up your cables and enjoy the clean look!
Love the design? Please leave a Like and a Boost to help others find this model! Your support helps me continue to develop and share free functional prints with the community.
JoBin
