Marque-page Black Pink - Lisa

Boost MeUn petit boost pour mon travail fait toujours plaisir et m'aide beaucoup  et c'est Gratuit ! :)

https://www.patreon.com/cw/3D_MENTIEL

Si vous aimez mon travail, souhaitez vendre mes créations ou trouver des modèles exclusifs venez faire un tour sur mon Patreon

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.2
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA Deeplee White  Transmission Distance: 4.7
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Yellow
    At layer #18 (1.52mm) swap to White for the rest.