May 13, 2026
Description
Update June 12, 2026:
Replaced customization file to work better with very thick tables. Please note to enter the thickness in mm. Minimum wall distance is 51 mm and minimum table thickness for customizer is 36 mm but if your desk is thinner than that just print a longer bolt. The maximum size of the bolt needed is 53 mm.
Update June 3, 2026:
I updated the model and made it parametric so that you can adjust the opening for the thickness of your desk and I made the length adjustable if your desk needs to be further from the wall. I also included a fixed length short version. The new models have an optional tpu bumper because some people can't print tpu or they would rather use a felt pad to protect the wall. The original model is still available on plates 3 and 4.
Model Description:
This is an adjustable desk stabilizer that keeps your desk from shaking when using your mouse etc. My stand-up desk likes to move around a lot when I am working and it shakes the monitors too much. These stabilizers have a wheel that you can rotate to extend the stabilizer towards the wall which helps to stop it from moving. When you want to lower or raise the desk, just turn the wheel to retract the stabilizer. The new models can accommodate a desk thickness of 36 mm without having to use the customizer.
The optional part that touches the wall should be made from TPU so that it does not damage the wall. The TPU also provides more friction to stop the desk from moving. If you don't want to print the TPU part, you can use a piece of stick on felt to protect the wall.
For people that have a standing desk that they like to move up and down and not have to worry about retracting the stabilizer I have designed a model that utilizes rollers that will keep pressure on the wall as the desk moves up and down. Here is the link:
License:
MakerWorld Exclusive License
Bert Owen
