Adjustable trim tab

Boost MeSaving up for a printer with better quality than my ender 3!

Used iron wire for the red pins, M3 screw and nut through the yellow part. 

 

For assembly : 

 

• Press both of the yellow parts in the white part slots (pay attention to the hexagonal hole orientation), glue
• Get pins/iron wire through the hinge between white/gray , gray/blue, might need glue depending on the fit
• Press the M3 nut onto the hexagonal hole in the white part
• Add an M3 screw through both the yellow parts and the blue part in b
• etween

Setting angle : 

• Untighten the M3 screw enough for you to be able to slide the blue part
• Get your desired angle, you can use shims to get both trim tab at the same angle
• Tighten the screw again, done

 

As it's one of my first model, I'd love to hear recommendations and advice on it, working on a version that requires less  assembly, through live hinge, as well as an easier and more sensitive way of setting the angle. 

 

Tip here : 

https://ko-fi.com/thatoneandonlyusername