Oversized 3D Meowth Pokemon Card

Print at 100% infill up to a height of 2.6mm, with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 143.48x200mm in size

You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.6mm and the Actual Thickness is 2.6mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 7 unique filaments. 

Swap Instructions:
    Start with Black
    At layer #13 (1.16mm) swap to Red
    At layer #19 (1.64mm) swap to Cyan
    At layer #23 (1.96mm) swap to Yellow 

AMS completes the 3d Model.