Garden Sprinkler – Gardena-Style Connector

DESCRIPTION
3D printed garden sprinkler with an integrated Gardena-style male connector.

It is made for watering a garden, lawn, vegetable bed, or flower bed using a common Gardena-style quick hose coupling. When the sprinkler is raised about 1 m above the ground, the watering diameter is about 6 m.

Compatibility
The connector is made in a Gardena-style male shape and fits common Gardena-style quick couplings.

Assembly / extra parts
Apply teflon tape to the thread before use to ensure sealing.

Install an O-ring on the Gardena-style connector. The O-ring can be printed from TPU or replaced with a suitable rubber O-ring.

Glue may be used if needed during assembly.

Material notes
PETG is recommended for this print because the part is intended for outdoor and water-use conditions.