Butterfly Tap To Pay

Beautiful Butterfly Tap to Pay wand

There are two profiles 

One with 4 colors this will take longer and have more waist.

And one with only two colors. The two color profile is set up for a silk filament. This one will print faster and have much less printer waist.

Also these are very easy to paint in Bambu Studios. If you need a quick tutorial just message me, or youtube has allot as well.

Print both the heads, remove all of the supports. make sure you get all the little ones by the threads. 

Glue the two heads together. On these larger ones you can screw the stem on then put a dab of superglue at the two top corners, let that kick, then unscrew and squirt a little more in between them at the bottom. Or just put glue around the head and stick it together and get it aligned before it kicks

Then slide your card in and screw the stem on, Hold it right below the threaded part. The first few times it can be stiff to screw on, it will get easier with time.

Then Put on your Prettiest outfit and Hit the town!

Check out my other Tap to Pay wands Here