Fibi Chupi - staring and smiling warmly - Chubi

Phoebe from Wuthering Waves in her Fibi Chupi - Fibi Chubi version.

I've optimized this figure so it can be printed on all printers. 

First plate is a plain fibi designed for priming and painting.

Second plate is a full-color Fibi painted for H2C printers.

Third plate has only 4 simultanous colors being used so you can print it with one AMS using manual filament swaps.

Fourth plate is the same 4-color fibi but bigger, which allows you to get all details like the scarf symbol and the chest star pin.

Instructions:

Start with black, white, yellow and blue.

• At layer 218 there should be a pause, swap blue for your skin color and swap white for pink.
• At layer 259 there should be a pause, swap pink for purple/lilac.
• At layer 300 there should be a pause, swap purple/lilac for white.
• At layer 300 there should be a pause, swap skin color for blue.

If you're printing the bigger-sized Fibi:

Start with black, white, yellow and blue.

• At layer 273 there should be a pause, swap blue for your skin color and swap white for pink.
• At layer 309 there should be a pause, swap pink for purple/lilac.
• At layer 359 there should be a pause, swap purple/lilac for white.
• At layer 396there should be a pause, swap skin color for blue.