Apple Watch Charging Pad Maxi

The story behind the design

After designing the original Apple Watch Charging Pad to stop my charger from constantly flipping over, I wanted a bigger version – something with more presence on the nightstand or desk, and even better stability. That's how the Maxi Charging Pad was born: same proven design, scaled up for those who prefer a larger, more substantial base.

Features

• Compatible with all Apple Watch models and the original charging cable
• Larger footprint for extra stability and a more premium look
• Tight-fit recess keeps the charger from rotating
• Integrated cable channel for a clean finish
• Two designated spots for 8 cm adhesive foam strips to keep it firmly planted
• Minimalist design that fits any interior

Assembly Tutorial

What you'll need:

• The printed Apple Watch Maxi Charging Pad
• Your original Apple Watch charging cable
• Optional: 2 strips of Adhesive Foam Sponge (8 cm / ~3.15 inch each) – available from the Bambu EU store

Steps:

1. Feed the cable through – Push the charging cable all the way through the pad until it comes out on the correct side.
2. Position the charger head – Line up the round charging head with its designated opening. Start by inserting the wire side of the round head into the slot first.
3. Press down – Firmly press the round charging head into the recess. It's a tight fit, so apply steady pressure until it sits flush.
4. Tuck in the cable – Push the remaining cable fully into the cable channel along the pad so it stays in place.
5. (Optional) Add the foam strips – Take the Adhesive Foam Sponge Strip Roll from the Bambu EU store, cut two strips at exactly 8 cm (~3.15 inch) each, and stick them onto the two designated spots on the bottom of the pad for extra grip.