This modular, wall-mounted organizer brings all your essentials together in one compact place. It’s designed to perfectly hold a toilet paper roll, aroma diffusers, wet wipes, garbage bags, and towels.
The system is fully customizable, allowing you to print only the attachments you actually need!
⚠️ Important Note: This organizer is designed for daily essentials. Please do not overload it with heavy objects. It has been successfully tested with a full glass of water, showing stability for standard bathroom items.
All modular parts attach to the main base using a Snap-Fit Connector coupled with a stabilizing rectangle guide. This ensures solid hold.
When Assembling: Line up the attachment with the slot. You may need to gently guide the flexible snap connector into its corresponding hole until it clicks securely into place.
When Disconnecting: If you want to swap modules, be gentle and careful when pulling them out so you don't accidentally snap the locking tabs.
🧱 Guide to the Plates & Components
1. The Main Base (Plate 01 or Plate 02) —Print Only 1
Plate 01 (Standard Base): Has all attachment holes open and ready.
Plate 02 (Customizable Base): Features "closed" holes. If you don't want to use all attachments, you can choose which holes to open.
How to use in Slicer: Select the plug for the hole you want to open, right-click, and uncheck "Printable". Crucial: Select both the base and the remaining plugs, right-click, and choose Merge so they slice cleanly as a single object.
2. Toilet Paper Holder (Plate 03)
A sturdy, reliable arm designed to hold a standard toilet paper roll for smooth, effortless dispensing.
3. Upper Shelf (Plate 04)
Sits perfectly above the toilet paper. It’s the ideal spot for aroma sticks, diffusers, or small decorative plants.
Features a stylish Voronoi pattern. I have provided 3 design options on this plate:
Option A (As seen in photo): The full-depth classic basket with a solid, premium look.
Option B (Narrow): Same style, but with a narrower mounting section to save filament.
Option C (Full Voronoi): Completely covered in the Voronoi mesh. It uses the least amount of filament and offers a distinct look.
5. Towel Hooks (Plate 07 or Plate 08) — Print Only 1 Plate
Plate 07 (Rotatable Hooks): These can swing up, down, or to the side. You can easily swing them away when it's time to change the roll. The 2 hooks are set at 45° and 2 at 90° angles so they don't overlap.
Plate 08 (Fixed Position Hooks): For those who prefer a simpler setup. The base is fixed to the side so it never blocks the paper roll, but the individual hooks can still flip up or down.
6. Wall Mount Bracket (Plate 06) — Print Only 1 Option
The bracket slides into the base and screws into the wall.
Option 1 (Pre-drilled): Features holes designed for screw heads up to 7.3mm and a shaft diameter of 3.5mm.
Option 2 (Blank): No holes. Perfect if you want to drill custom holes in the slicer to match existing screws in your wall.
🚀 Print Settings
Filament: I printed in PETG for strength. This can be printed without issues in PLA as well.
Infill: 15% Gyroid.
Supports: Normal (auto) → Snug are turned on for the hooks and parts with Voronoi pattern. On build plate only also selected for hooks objects.
Urabes
