Boost MeIf you like the model, a boost is greatly appreciated - it helps support further designs and iterations!
⠀
Features
Custom design made to be compatible with Battlezone Manufactorum and Sector Imperialis buildings, but can be used with other terrain
4 different designs for variety on the gaming table
Optimised for 0.2mm layers and fast prints
Flat top surfaces minimise visible layer lines
Scatter bits can be placed at an angle but are printed flat
Prevent compatible buildings from sliding around using included connectors
Anti-Slip solution: add 0.9x16mm rubber bands to prevent your bases from sliding on the table
⠀
Printing notes
Make sure you have good bed adhesion! Please clean your plate with dish soap before printing.
Let the model cool completely before removing it from the build plate. Overlapping joints are only 2 layers thick to keep the base slim. Remove carefully!
⠀
⁉️
Which plates should I print? How do I mirror a footprint?
Can I print without the sand texture? How can I reduce slicing/print time?
→ Check the FAQ PDF below in the Documentation section
⠀
Assembly
P1S equivalent or larger
A, B and C parts form one Rectangle (e.g. A1, B1 and C1 for design 1)
Align A and B using the triangle cutout
Glue C on top using CA (superglue)
Add scatter pieces wherever you want!
A1 mini
1A Top, 1A Bottom, 1A Con form one subassembly (1B Top, 1B Bottom, 1B Con form another, and so on)
Use these subassemblies as parts A and B and follow P1S assembly guide
The base includes a subtle textured top surface on the ground. You can enhance it further with sand, rocks, or tufts!
marcorei
